- YAMAHA OUTBOARD SCAN TOOL INSTALL
- YAMAHA OUTBOARD SCAN TOOL UPDATE
- YAMAHA OUTBOARD SCAN TOOL SOFTWARE
There are lots of other things this software can do, but that is for another day. 12) Shut off the water 13) Turn off the engineRepeat for other engine. xls file.in a nutshell.a file Excel can read, or most any data application like Notepad, wordpad etc.) 11) If you want to check out and see if you have had any engine "errors", click on the "Diagnosis", and then on "Diagnosis Record". csv file or a "Comma Separated Value" file and an. For Engine hours click on "Data Logger" and then click on "Engine Operating Hours according to engine speed" 10a) If you wish to save the hours, click F2 to save the file (it saves as a. 10) Hit enter and you should have a complete menu of items you can look at.
YAMAHA OUTBOARD SCAN TOOL INSTALL
If it says it failed to communicate to the ECM, then either your driver didn't install or you aren't plugged in the proper sequence. 9) Hit Enter it should says something about communicating to the ECM. If it is not, then browse to C:\Program Files\YDS\Driver 8) Launch the YDS software. 5) Start your engine 6) Turn on the water to your engine 7) Plug in the USB plug into your computer 7A) One time only step-you should get a "New Hardware" message.if the disk is still in the drive, it will find the drivers. The YDIS couplers are identified by "DIAGP" tag (port engine) or "DIAGS" tag (starboard engine) on the deck wire harness. On the 2015s the YDIS couplers are located in the driver's helm compartment. It will have one red wire on one side of the plug and 3 or 4 wires on the side you will plug into. On 210s, it is tucked into the wiring harness over the top of the port engine. On 2007+ 230's it is behind the plate on the starboard side of the engine compartment. If you have a 2006 or less, it will be behind the cover plate in the rear starboard storage locker (yeah who would have thunk!).
YAMAHA OUTBOARD SCAN TOOL UPDATE
2) Update the DB on the software (lauch the SW and press F1) 3) Locate your connection point on the engine. At the moment it appears there is no available software to access these boats. All data from your engine can be saved to your computer for future reference using Microsoft Excel.PC, Laptop, or Tablet hardware requirements are:Windows Based Operating Systems (XP, VISTA, 7, and 8) (32 or 64 bit), One available USB port, and a DVD/CD-ROM drive for the software installation. YDS Yamaha 1.33 software You will be able to read all of your engine diagnostic codes and records, engine hours, activate low and high pressure fuel pumps, test individual injectors and ignition coils, set tilt-limit, de-activate most engine sensors for testing, view all sensor readings (TPS, IAC, battery voltage, charging voltage, rpm, oil pressure, MAP, etc.), stationary and static diagnostic tests, and many other functions.
Item: 272253409137 YDS Diagnostic 1.33 Software for Yamaha Outboard Jet Boat WaveRunner.
0 kommentar(er)
